SBSG-03-2B3B-A240 YUKEN伺服阀/油研

YUKEN伺服阀/油研液控伺服阀主要是指电液伺服阀,它在接受电气模拟信号后，相应输出调制的流量和压力。它既是电液转换元件，也是功率放大元件，它能够将小功率的微弱电气输入信号转换为大功率的液压能（流量和压力）输出。在电液伺服系统中，它将电气部分与液压部分连接起来，实现电液信号的转换与液压放大。电液...

YUKEN伺服阀/油研
电磁换向阀被关闭（如下所示流量从大偏移小和致动器
速度也同样地移动切换时间可以通过先导
10 μm or finer and install it near the valve inlet.
installation drawing (P. 7 and 8) of the sub-plate used
当订购密封请注明来自密封件号该表
权利除了上述的密封件密封件为先导阀包含在密封套件
other dimensions, refer to "Terminal Box Type".
For dimensions of the valve mounting surface, see the
installation drawing (P. 6 and 7
流设置调节旋钮调节转盘顺时针转动导致先导流量减少
When the solenoid operated directional
of the sub-plate usedate is shifted from minimum
For dimensions of the valve mounting surface, see the
valve is turned on ( shown below),the flow r
to maximum and the actuator speed is
also shifted likewise. The switching time can be set by the pilot flow
To carry out flow adjustments by a
s small degree as 2 L/min (.53 U.S.GPM) or less, be sure to use a line filter of
YUKEN伺服阀/油研

YUKEN伺服阀/油研

如果您觉得“SBSG-03-2B3B-A240 YUKEN伺服阀/油研”描述资料不够齐全，请联系我们获取详细资料。(联系时请告诉我从仪器交易网看到的，我们将给您最大优惠！)
本页链接：http://www.yi7.com/com_shqt8808/sell/itemid-6422470.html
已经有1061位访客查看了本页.