| 提交询价信息 |
| 发布紧急求购 |
价格：电议
所在地：广东 深圳市
型号：7630
更新时间：2018-07-08
浏览次数：5023
公司地址：深圳市龙岗区深圳市坂田街道五和大道永香路华熠科技大厦B1008
秦经理(先生) 经理
深圳市美孚科技有限公司经销批发的数字存储示波器、频谱分析仪、数字电桥LCR、台式万用表、安规测试仪、音频测试仪、视频制式测试仪、电子负载、电能质量分析仪、电参数测试仪、电池测试仪、LED光谱仪器、电源测试仪、其他仪器仪表畅销消费者市场，在消费者当中享有较高的地位，公司与多家零售商和代理商建立了长期稳定的合作关系。深圳市美孚科技有限公司经销的数字存储示波器、频谱分析仪、数字电桥LCR、台式万用表、安规测试仪、音频测试仪、视频制式测试仪、电子负载、电能质量分析仪、电参数测试仪、电池测试仪、LED光谱仪器、电源测试仪、其他仪器仪表品种齐全、价格合理。深圳市美孚科技有限公司实力雄厚，重信用、守合同、保证产品质量，以多品种经营特色和薄利多销的原则，赢得了广大客户的信任。
深圳市美孚科技有限公司本着互利发展、资源共享、服务第一的原则，依托广东珠江三角洲巨大的市场，辐射全国。深圳市美孚科技有限公司专注与完善的(仪器配套方案)(解决方案)(技术支持)高性能、高品质、高效率的全程式服务跟踪。代理国内外品牌厂商多达20多家，多年来不懈努力的为客户服务！主营产品、示波器、频谱仪、信号发生器、音频测试仪、安规测试仪、数字电桥、功率计、AC/DC变频电源、万用表、钳形表、电流探头等各类仪器仪表！主营品牌：美国安捷伦-AGILENT、美国泰克-Tektronix、美国福禄克-FLUKE、日本横河-YOKOGAWA、菊水-KIKUSUI、日本德仕-TEXIO、日置-HIOKI、共立-KYORITSU、台湾固纬-GWINSTEK、台湾华仪-EXTECH、台湾艾德克斯-ITECH、杭州远方-EVERINE、同惠、优利德、北京普源、安泰信等仪器。
本公司的(仪器配套方案)(解决方案)(技术支持)承载这客户的考验！如果您需要本公司的支持、请第一时间联系我们的客服。我们将竭诚为阁下服务！
在互联网迅猛发展的今天，本公司将放眼世界，利用互联网这个强有力的信息工具，将我们的品牌再次提升，让美孚科技仪器仪表公司更好地为广大用户服。公司理念：秉承坦诚、公道求新、务实、和气生财之经营理念，以“诚信服务”为公司之宗旨。公司将不懈致力于客户之需求.....
可与华仪电子的安规测试仪连结；组成安规六合一(ACW/DCW/IR/GB/RUN/LLT)测试系统
型 320 x 240 Graphic LCD ，可同时显示量测电压/接触电流及测试时间
量测频宽 DC - 1MHz 完全符合 IEC60990 接触电流测试规范
可量测zui大峰值 75mApeak / 有效值 35mArms，满足安规机构测试验证需求(选配)
内建 7 组人体模拟阻抗(MD)且可扩充一组，一台仪器就可以满足多种安规标准要求
MD具有BNC量测端子，可外接示波器或电压表读取MD电压值，方便对MD进行校准
人体模拟阻抗(MD)的校准方式，可以完全符合IEC60990标准规定进行
可灵活选择MD漏电流量测点(如: IEC60065 U1&U2)；符合安规标准要求
负载zui大容量为 10KVA / 40Arms，允许启动瞬间承受 250Apeak 不切断保护
可选配产品电气性能量测模块(RUN Test Module)，可量测功率/电压/电流/功率因子
可选配多功能界面卡内含USB-A数据收集功能，内部记忆可储存至少10万笔的测试结果
|
Opt.731 GPIB Interface |
||
|
Opt.751 Multi-function Interface Card |
||
|
Opt.752 Run Test Function |
||
|
Opt.753 HV(3.5KVac/3.5KVdc) & GB(40A) |
||
|
Opt.754 High Measurement Range 35mArms / 75mApeak & 4MDs |
||
|
Opt.758 Ethernet Card |
||
|
Opt.760 HV(5KVac/6.0KVdc) & GB(40A) |
||
|
Opt.761 Measuring Devices Voltage DIsplay |
||
|
Opt.763 USB & RS232 PC Control Card |
7630 Touch Current Tester
| MODEL | 7630 | |
|---|---|---|
| INPUT | ||
| Voltage | 115/230 VAC ± 15% | |
| Frequency | 50/60 Hz ± 5% | |
| Fuse | 2A Slow-Blo 250V AC | |
| Line condition | ||
| Power Switch | Reverse polarity switch for normal condition (on / off / auto setting) | |
| Neutral Switch | Neutral switch on/off selection for single fault condition | |
| Ground Switch | Ground switch on/off selection for class I single fault condition | |
| Probe Setting | ||
| Surface to Surface (PH- PL) | ||
| Surface to Line(PH - L) | ||
| Ground to Line (G - L) | ||
| Ground to Neutral (G - N) | ||
| Auto Function (G - N & G - L) | ||
| SETTING | ||
| Touch Current High Limit (RMS) | Range: | 0.0uA~ 999.9uA/ 1000uA~5999uA/ 6.00mA~20.00mA |
| Resolution: | 0.1uA/1uA/0.01mA | |
| Touch Current Low Limit (RMS) | Range: | 0.0-999.9 uA |
| Resolution: | 0.1uA | |
| Touch Current High Limit (Peak) | Range: | 0.0uA - 999.9uA/ 1000uA - 9999uA/ 10.0mA - 30.0mA |
| Resolution: | 0.1uA/1uA/0.1mA | |
| Touch Current Low Limit (Peak) | Range: | 0.0-999.9 uA |
| Resolution: | 0.1uA | |
| DISPLAY | ||
| Touch Current Display (RMS) | Range 1 | 0.0uA~ 999.9uA, frequency DC - 1MHz |
| Resolution | 0.1uA | |
| Accuracy | DC : ±2% of reading + 3counts 15Hz < f <100KHz : ±2% of reading + 3counts 100KHz < f < 1MHZ : ±5% of reading (10.0uA - 999.9uA) |
|
| Range 2 | 1000uA~8500uA, frequency DC - 1MHz | |
| Resolution | 1uA | |
| Accuracy | DC : ±2% of reading + 3counts 15Hz < f <100KHZ : ±2% of reading + 3counts 100KHz < f <1MHZ : ±5% of reading (10uA - 8500uA) |
|
| Range 3 | 8.00mA~20.00mA, frequency DC - 1MHz | |
| Resolution | 0.01mA | |
| Accuracy | DC : ±2% of reading + 3counts 15Hz < f < 1MHz : ±5% of reading (0.01mA -20.00mA ) |
|
| Touch Current Display (Peak) | Range 1 | 0.0uA~ 999.9uA, frequency DC - 1MHz |
| Resolution | 0.1uA | |
| Accuracy | DC : ±2% of reading +2uA 15Hz < f <1MHZ : ±10% of reading +2uA |
|
| Range 2 | 1000uA ~ 8500uA, frequency DC - 1MHz | |
| Resolution | 1uA | |
| Accuracy | DC : ±2% of reading +2counts 15Hz < f <1MHz : ±10% of reading +2counts |
|
| Range 3 | 8.0mA ~ 30.0mA, frequency DC - 100KHz | |
| Resolution | 0.01mA | |
| Accuracy | DC : ±2% of reading +2counts 15Hz < f < 100KHz : ±10% of reading +2counts |
|
| Measuring Device Module | ||
| MD1 | IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1, IEC60598-1, IEC60065, IEC61010 | |
| IEC60990 Fig4 U1, IEC60065 | ||
| MD2 | IEC60990 Fig5 U3, IEC60598-1 | |
| IEC60990 Fig5 U1 | ||
| MD3 | IEC 60601-1 | |
| MD4 | UL544NP, UL484 , UL923, UL471, UL867, UL697 | |
| MD5 | UL544P | |
| MD6 | UL1563 | |
| MD7 | IEC60950, IEC61010-1 FigA.2 (2K ohm) for RUN Test MD Circuit. | |
| External MD | Basic measuring element 1k ohm | |
| MD Voltage Limit | 70Vdc | |
| Leakage Current Offset | Range: | 0 - 999.9uA |
| Resolution: | 0.1uA | |
| DUT POWER | ||
| AC Voltage | 0.0-277.0V | |
| AC Current | 40Arms max continuous | |
| Over Current Protection | 50Arms, Response Time < 3 sec / 250Apeak Response Time <10u sec | |
| AC Voltage High/Low Limit | Range: | 0.0-277.0V |
| Resolution: | 0.1V/step | |
| AC Voltage Display | Range: | 0.0 - 277.0 V |
| Resolution: | 0.1 volt / step | |
| Accuracy: | ±(1.5% of reading + 2 counts) , 30.0 - 277.0VAC | |
| Delay time setting | Range: | 0.2 !V 999.9 seconds |
| Resolution: | 0.1 second | |
| Timer display | Range: | 0.0 !V 999.9 seconds |
| Resolution: | 0.1 second | |
| Accuracy: | ± (0.1% of reading + 0.05 seconds) | |
| GENERAL | ||
| PLC Remote Control | Input - Test, Reset, Interlock & Recall File 1 through10 | |
| Output - Pass, Fail, Test-in-Process, Start-Out, Reset-Out | ||
| Scanner Control | It is applied to control Matrix Scanner (Model 7006) | |
| Memory | 50 memories , 30steps per each memory . Max. Result Display 900 data (30 memories x 30 steps) | |
| Auto Reverse Function | AUTO Reverse ON / OFF parameter setting selection Automatic Reverse polarity switch for normal condition in one step setting menu. Only display maximum leakage current value. |
|
| Scope Output Interface | At rear panel BNC type to connet scope for some IEC standards test requirement and application. | |
| Display | 320 X 240 graphic LCD | |
| LCD Contrast Setting | Range: 1-9; 1 is lightest character, 9 is darkest character. | |
| Alarm Volume Setting | Range: 0-9; 0=OFF, 1 is softest volume, 9 is loudest volume. | |
| Security | Lockout capability to avoid unauthorized access to test set-up programs. | |
| Calibration | Software and adjustments are made through front panel, Automatic Calibration alert function to signal operator when calibration is due. |
|
| Results Display | All test result information will be displayed on the screen. | |
| Interface | RS232 standard | |
| Safety | Product with TUV/GS certificate | |
| Dimension | 430 (W) x 133(H) x 300 (D) mm | |
| Weight | 12 Kg | |
| STANDARD ACCESSORIES | ||
| Power Cord | X1 | |
| Fuses | X2 (Including a spare contained in the fuse holder) | |
| Interlock Disable Key(1505) | X1 | |
| Hipot Test Lead for PH / PL (1101) | X2 | |
| RS232 |
X1 | |
| DUT Power Cable 40A(1148) | X1 | |
| RUN Module (Opt.752) | ||
| W | Range : 0-1KW / 1-10KW Resolution : 0.5W / 5W | |
| A | Range : 0.000 !V 3.500 A / 3.00 - 40.00A , Resolution : 0.001A / 0.01A | |
| PF | 0.000 -1.000 | |
| Leakage Current | Range : 0.00 - 10.00mA , Resolution : 0.01mA | |
| AC Current High/Low Limit Setting | Range: | 0-40A |
| Resolution: | 0.01A/step | |
| AC Current Display | Range: | 0.000 !V 3.500 A / 3.00 - 40.00A |
| Resolution: | 0.001A / 0.01A | |
| Accuracy : | ± (2 % of reading + 5 counts) / ± (2 % of reading + 2 counts) | |
| AC Power High/Low Limit Setting | Range: | 0 - 10KW |
| Resolution: | 1W | |
| AC Power Display | Range: | 0.0 -1000.0W / 1000 - 10000W |
| Resolution: | 0.5W / 5W | |
| Accuracy : | ±(2 % of reading + 2 counts ) | |
| Power Factor High/Low Limit Setting | Range: | 0.000 - 1.000 |
| Resolution: | 0.001 | |
| Power Factor Display | Range: | 0.000 - 1.000 |
| Resolution: | 0.001 | |
| Accuracy : | ± (2 % of reading + 2 counts ) | |
| Leakage Current High/Low Limit Setting | Range: | 0.00 - 10.00mA |
| Resolution: | 0.01mA | |
| Leakage Current Display | Range: | 0.00 - 10.00mA |
| Resolution: | 0.01mA | |
| Accuracy : | ± (2 % of reading + 2 counts ) | |
| Delay Timer Setting | Range: | 0, 0.2 - 999.9 |
| Resolution: | 0.1 | |
| Dwell Timer Setting | Range: | 0, 0.1-999.9 (0=continuous) |
| Resolution: | 0.1 | |
| Timer display | Range: | 0.0 - 999.9 seconds |
| Resolution: | 0.1 second | |
| Accuracy: | ± (0.1% of reading + 0.05 seconds) | |
| Power Control | It is applied to control Transformer Box (1931/1931S) or AC Power Source(6700/6800/6400 Series) | |
| HV & GB |
||
| Max. ACW 4000VAC, DCW 4000VDC & Max. Ground Bond 40A | ||
| GPIB Interface Card (Opt. 731) | ||
| Printer Port Interface Card (Opt. 732) | ||
| Multi-function Interface Card (Opt. 751) | ||
| Including USB port A type, combination of RS-232, RS-485 port, and Bar Code Input with internal memory capability. | ||
| High Measurement Range 35mArms / 70mApeak & 4MDs (Opt. 754 ) | ||
| 35mArms / 70mApeak for IEC60990 fig4(U1 and U2), IEC60990 fig5(U1 and U3), UL484, IEC60601 Test Requiremt , Notice : Option this MD circuit have to replace MD module all MD circuits . |
||
| Transformer Box (Option) Add this option must optional Opt.752 RUN Module. | ||
| 1931 Series Transformer Box (500VA/ 1KVA/1.8KVA/3.6KVA) |
Multi-Tape of 1.0, 1.06, 1.1 times of input voltage. | |
| 1931-S Series Transformer Box (500VA/ 1KVA/1.8KVA/3.6KVA) |
Multi-Tape of 0.8, 0.85, 0.9, 1.0, 1.06, 1.1 times of input voltage. | |
| AC Power Source (Option) Add this option must optional Opt.752 RUN Module. | ||
| 6800 Series Digital AC Power Source (6805, 6810 , 6820 , 6830 and 6840 ) | ||
| 6700 Series Programmable AC Power Source (6705, 6710 , 6720 , 6730 and 6740 ) | ||
| 6400 Series AC Power Source (6402, 6403, 6405, 6410 ) | ||
免责声明：以上所展示的[7630 华仪7630接触电流测试仪]信息由会员[深圳市美孚科技有限公司]自行提供，内容的真实性、准确性和合法性由发布会员负责。
